Using X-ray, Automatic Optical Inspection (AOI), microscope and other optical inspection system, for both catastrophic failure (e.g. missing component) and quality defects (e.g. fillet size or shape or component skew). It is able to find faults such as opens, shorts, insufficient solder, excessive solder, missing electrical parts, and mis-aligned components.
Automated X-ray Inspection
Automatic Optical Inspection AOI
Inside of AOI
DUT was tested by the high and low temperature, temperature shock, hot and humid, salt spray, the solar radiation, and specified environmental conditions. All tests verify the reliability of DUT in extreme environment .
Salt Mist Chamber
Dry Heat Chamber
XENON Test Chamber
Including tape wear-resistant, alcohol-resistant, scratch resistance, adhesion test, artificial sweat resistant and other verification test.
Mechanical Push and Pull Test
Repeated Free Fail
Electric Vibration System
Including RF antenna, audio, power consumption, burst noise, volume, anti-static testing, battery charging curve, the actual charging and other verification test. All tests would cover the basic performance index of mobile devices.
Flip Endurance Tester
Slip Endurance Tester
Radio Performance Test
Including battery and battery chargers. Such as charge and discharge of battery, battery life, performance of battery protection board, the charger resistance to high voltage, burn of the charger and other verification test.
Battery Internal Resistance Tester
Battery Protection Board Performance Tester
Free Fail Test
Battery Performace Testing System