Processing, sensing, power, and the outside connection are a way to explain the device. Wearable hardware architecture at NexPCB does not require those four before the schematic, and it does not require the architecture to be finished before the conversation. A first version can integrate the path end to end. The groups the product uses are added or left out with the product.
The schematic can start from the path this version has to show: power, data, and the outside connection. Processing sits where the samples are handled. Sensing is the parts that collect them. Power is the rails and the cell path. The outside connection is how the device talks, charges, or both. A product adds or drops a group. A first version can include every group this product needs. It can also leave a group thin. It does not have to wait until the architecture has been finished elsewhere.
The schematic and the layout start from the path this version is checking.
| Block | Where it sits | What the first version has to show |
|---|---|---|
| Processing | In the middle of the split | That samples have a place to land |
| Sensing | Connected into that middle | Which sensor is on this version |
| Power | Connected into that middle | Which rails exist before the routes |
| Outside connection | Leaving that middle | Charge, radio, or the one this version uses |
The first schematic follows the blocks this version actually includes.
The first miss is often the wireless choice. A wireless method that is wrong is one important risk. The affected parts are assessed before power, the antenna, and the interface are changed. They are not redrawn as a set just because the radio was wrong.
A first version can integrate end to end. The result it owes is the power, the data path, and the outside connection this version named. A block that was never in the question waits.
It includes the blocks this version is built to check. A first version can include every block the product needs. It can also leave a block for a later version when that is the plan.
A wrong radio is assessed for the parts it affects. Power, the antenna, and the interface move when that assessment says they move. They are not changed as a set by default.
Bring the path this version has to show, and mark which groups are in it. Name the wireless method if the device has one, and name the rails you already expect. The architecture does not have to be finished before this conversation. Start at our project inquiry form.