NexPCB Blog

Wearable contract manufacturing: what the contract actually covers

Written by NexPCB United | Nov 16, 2026, 3:29:46 AM

Wearable contract manufacturing is settled when the shipment is named. A finished module is one piece of that shipment. The contract has to name the deliverable first: a board, a closed device, or a matched kit with pairing and packaging. At NexPCB we build against that named shipment. Our wearable solutions cover the wider path from design into volume.

What the shipment pulls into scope

Three choices change the scope.

The deliverable decides the work. A board-level scope can include PCB fabrication, component sourcing, assembly, firmware programming, and agreed board-level testing, depending on the project requirements. A closed device adds the housing, the joint, and the function after assembly. A kit adds pairing, size, the test record, and pack-out. Pairing and pack-out requirements are defined by the agreed deliverable and project scope. On a matched kit, pairing, size, the test record, and pack-out are the kit-level extras that have to be named.

Parts you supply decide the incoming check. A garment, a custom enclosure, or a module you send has to be on the list the build matches against. A part left off that list cannot be part of the kit check.

Acceptance decides when the batch is done. Pairing, the size, the test record, and the pack contents are the release for a matched kit. One module that passes on its own still has to be bound into the kit before that kit can ship.

How wearable contract manufacturing proceeds

We put the scope in one table. The lines are set on the project. Design support sits in the scope when you ask for it, and the product definition stays with you when it is yours to hold.

WorkWhat you confirmWhat we carry
ShipmentName a board, a closed device, or a matched kit.Materials, assembly, test, and pack-out follow that shipment.
Your partsList every part you send, including a garment or a custom enclosure.Incoming checks and kit matching use that list.
ChangesHold the product definition, the revision, and the acceptance rule.Engineering support and build coordination follow the revision in scope.
ReleaseState the pairing, the size, the test record, and the pack-out when the deliverable is a kit.Production delivery leaves the batch with that record.

The boards inside a kit are built under electronics manufacturing. Later material or process changes stay with product lifecycle management.

What a kit project still has to show

A module that works on the bench can still leave the kit short.

On a multi-module medical wearable, the finished kit was a main acquisition module, a left motion sensor, a right motion sensor, a magnetic charging case, and a garment in the right size. We paired each sensor to the main module, marked it left or right, and held the kit until the garment size, the certificate, the accessories, and the device set matched. Pairing, laser marking, and kit-level binding were part of that release, as written in Smart textiles, sensors, and production testing.

On your kit, the release rule names the configuration, the pairing, the size, the test record, and the pack-out before the batch ships.

Frequently asked questions

What does wearable contract manufacturing have to name first?

The shipment. A board, a closed device, and a matched kit pull different work in. Pairing, size, the test record, and pack-out are kit-level extras when the agreed deliverable is a matched kit; on other shipments, pack-out and test follow the scope you confirm for that deliverable.

When is the kit done?

When the modules, the size, the test record, and the pack contents match the release rule you confirmed. A module that passes alone still has to be bound into that kit.

What to bring to the first conversation

Tell us the shipment you expect, the files you already have, and the parts you will supply. If a pairing rule, a size run, or a test record already exists, say what it is. We then mark the work still missing from the scope, and the acceptance rule that will release the batch.

Share detailed design files once a non-disclosure agreement is in place. Start at our project inquiry form.