NexPCB Blog: me

20 Common Quality Issues in Plastic Production

If you are dealing with electronic products development, it's very likely that you are dealing...

How to Avoid Short Shots in Your Plastic Production

Creating plastic casing using the injection molding process is more and more common during the...

How To Avoid Sink Marks In Your Plastic Production

 

After analyzing the short shot issue, We decided to come back to another problem you can...

7 Mistakes Contract Manufacturers Make During the NPI Process

Most of the time, hardware startups are faced with the challenge of New Product Introduction...

2 Minutes to Know Blow Molding Technology

Blow molding technology originated in the 1930s. After years of development, it has developed...

A quick look at FDM 3D printing

Fused Deposition Modeling (FDM), or Fused Filament Fabrication (FFF) is an additive...

An introduction to 3D printing

3D printing technology (also called Rapid Prototyping) is an additive computer-controlled...

Reinforcing Rib Structure Design for Plastic Parts

In a previous article, we discussed a bit on rib design and the reasons that you'd want to have...

The most common thermoplastic material properties

In daily life, injection materials can be seen everywhere. They are described with a jumble of...

7 Key points that Need your attention During your Plastic Product Design

There are many, many different elements of plastics design and balancing them can make the...

How to Avoid Color Streaks and Gloss Difference in your Plastic Production

Today marks the last of our posts about common issues in your plastic production. This post...

How to Avoid Silver Streaks and Splay Marks in Plastic Injection Molding

Today we are back with two new common issues in plastic production. If you are new here, this...