Reinforcing Rib Structure Design for Plastic Parts
In a previous article, we discussed a bit on rib design and the reasons that you'd want to have...
NexPCB Blog
Everything you need to get started to manufacture awesome IoT products. PCB, PCBA, EMS, SMT, Supply Chain and Sourcing.
The most common thermoplastic material properties
In daily life, injection materials can be seen everywhere. They are described with a jumble of...
How to deal with insufficient solder and excess solder in PCBA
In the process of the PCBA production, there are several common problems may occur including tin...
SMT Reflow Soldering Temperature Curve
Reflow soldering is an extremely vital step in the SMT(Surface Mount Technology) process. The...
What is SMT Nitrogen reflow soldering?
With the increase of assembly density and the appearance of fine spacing assembly technology,...
SMT BGA Solder Joint Slice Analysis
With the continued shrinking of electronic components and the addition of many BGAs to electronic...
Let's Talk Tariffs
There has been a ton of talk about trade, taxes, tariffs, and trade wars lately. It's not a...
SMT Stencil: SMT Steel Mesh
SMT steel mesh, which is used to consistently distribute solder paste or patch glue, is the outer...
7 Key points that Need your attention During your Plastic Product Design
There are many, many different elements of plastics design and balancing them can make the...
How to Avoid Color Streaks and Gloss Difference in your Plastic Production
Today marks the last of our posts about common issues in your plastic production. This post belongs...
How to Avoid Silver Streaks and Splay Marks in Plastic Injection Molding
Today we are back with two new common issues in plastic production. If you are new here, this post...
How to avoid Black Specs, Ejector Pin Marks and Drag Marks in your Plastic Production
If you've been following us, you might have noticed that avoiding quality issues in your plastic...
How to Avoid Cracks and Burn Marks in your Plastic Production
After analyzing the Short Shot and 10 other plastic production issues, we decided to come back to...
The Basics of Display: View Angle and View Direction
When we introduced IPS in a previous article, we mentioned one of the biggest advantages was in...
The Basics of Display: In-Plane Switching
At the China International Display Industry Conference in 2018, JDI (Japan Display Inc) presented...
How to Avoid Sink Marks in Your Plastic Production
This post is the 11th article in our series about common issues that you can encounter during your...